Precision Sheet Metal Parts Manufacturing Powder Coating Line/Finish Coating/Spraying Line

1.Workpiece size:L2000W700 H1700(mm).Double points hanging

2.Line speed through:L2000W700 H1800(mm).(Front high and back low hang method)

3.Hanging way:Single or double point hanging, equipped with c-type hanging and beam hanging

4.Catenary:QXT250/50KG,The height of the hanger is 1100 mm

5.Maximum workpiece weight:Single point hanging≤100Kg

6.Process linear velocity:2.0m/min

Description

Precision Sheet Metal Parts Manufacturing Powder Coating Line/Finish Coating/Spraying Line

L2000W700 H1800(mm).(Front high and back low hang method)

Powder coating line:The workpiece passes through the surface joint preprocessor to remove the dust and grease attached to the surface of the workpiece and form a film on the surface of the workpiece to improve the binding force of the workpiece and powder

The surface combination processor was pre-degreased → degreased → washed 1→ washed with pure water 1→ sprayed with pure water 1→ washed with silane → washed with pure water 2→ washed with pure water 3→ sprayed with pure water 2

Production line design basis

Item
Name
Design
1
Porduct name
Metal Sheets/Hardware
2
Product material
Cold rolled plate (no rust, no oxide) (plate thickness 0.5-5mm)
3
Workpiece size
L2000W700 H1700(mm). Double point hanging
4
Wire speed through size
L2000W700 H1800(mm). (front high rear low hanging method)
5
Suspension way
Single or double point hanging, with C – type hanging and beam hanging
6
Suspension chain
Qxt250/50kg,
7
Maximum workpiece weight
Single point hanging ≤100Kg
8
Production line capacity
2.0m/min (customized by the buyer), Note: the thick workpiece shall be slowed down
9
Speed adjust range
0.5-3.0m/min
10
Heating energy
Nature gas

Reviews

There are no reviews yet.

Be the first to review “Precision Sheet Metal Parts Manufacturing Powder Coating Line/Finish Coating/Spraying Line”

Your email address will not be published. Required fields are marked *