Description
Precision Sheet Metal Parts Manufacturing Powder Coating Line/Finish Coating/Spraying Line
L2000W700 H1800(mm).（Front high and back low hang method）
Powder coating line：The workpiece passes through the surface joint preprocessor to remove the dust and grease attached to the surface of the workpiece and form a film on the surface of the workpiece to improve the binding force of the workpiece and powder
The surface combination processor was pre-degreased → degreased → washed 1→ washed with pure water 1→ sprayed with pure water 1→ washed with silane → washed with pure water 2→ washed with pure water 3→ sprayed with pure water 2
Production line design basis
Item | Name | Design | ||
1 | Porduct name | Metal Sheets/Hardware | ||
2 | Product material | Cold rolled plate (no rust, no oxide) (plate thickness 0.5-5mm) | ||
3 | Workpiece size | L2000W700 H1700(mm). Double point hanging | ||
4 | Wire speed through size | L2000W700 H1800(mm). (front high rear low hanging method) | ||
5 | Suspension way | Single or double point hanging, with C – type hanging and beam hanging | ||
6 | Suspension chain | Qxt250/50kg, | ||
7 | Maximum workpiece weight | Single point hanging ≤100Kg | ||
8 | Production line capacity | 2.0m/min (customized by the buyer), Note: the thick workpiece shall be slowed down | ||
9 | Speed adjust range | 0.5-3.0m/min | ||
10 | Heating energy | Nature gas | ||
Reviews
There are no reviews yet.